[PATCH 0/3] arm64: dts: qcom: ipq6018: support thermal sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


IPQ6018 have a thermal sensor HW that's compatible with existing
qcom-tsens driver, so add dt-binding and enable it in devicei-tree.

Mantas Pucka (3):
  dt-bindings: thermal: qcom-tsens: add IPQ6018 compatible
  arm64: dts: qcom: ipq6018: add tsens node
  arm64: dts: qcom: ipq6018: add thermal zones

 .../devicetree/bindings/thermal/qcom-tsens.yaml    |   1 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              | 131 +++++++++++++++++++++
 2 files changed, 132 insertions(+)


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux