[PATCH 3/4] arm64: dts: qcom: sm8550-qrd: add correct analogue microphones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add proper audio routes for onboard analogue microphones AMIC[1345] -
MIC biases and route from TX macro codec to WCD9385 audio codec.

This finally brings AMIC1, AMIC3, AMIC4 and AMIC5 onboard microphones to
work.  AMIC2 (headphones) should be fine well, however it didn't work
during tests, probably because of incomplete USB switch.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 76e9ca954093..79ec673f9f7c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -123,14 +123,21 @@ sound {
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux