Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/16/2024 6:27 PM, Dmitry Baryshkov wrote:

On Tue, 16 Jan 2024 at 14:06, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:


On 1/16/24 10:49, Ritesh Kumar wrote:
Enable Display Subsystem with Novatek NT36672E Panel
on qcm6490 idp platform.

Signed-off-by: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
---
   arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 100 +++++++++++++++++++++++
   1 file changed, 100 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index 2a6e4907c5ee..efa5252130a1 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -9,6 +9,7 @@
   #define PM7250B_SID 8
   #define PM7250B_SID1 9

+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   #include "sc7280.dtsi"
   #include "pm7250b.dtsi"
@@ -38,6 +39,25 @@
               stdout-path = "serial0:115200n8";
       };

+     lcd_disp_bias: lcd-disp-bias-regulator {
+             compatible = "regulator-fixed";
+             regulator-name = "lcd_disp_bias";
+             regulator-min-microvolt = <5500000>;
+             regulator-max-microvolt = <5500000>;
+             gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+             enable-active-high;
+             pinctrl-names = "default";
+             pinctrl-0 = <&lcd_disp_bias_en>;
property-n
property-names

all throughout the patch

Thanks, I will update in the new version.

+&gpu {
+     status = "disabled";
+};
Hm.. generally we disable the GPU in the SoC DT, but that doesn't
seem to have happened here..

Thinking about it more, is disabling it here necessary? Does it
not fail gracefully?
Missed this.

I'd say, I don't see a reason to disable it at all. The GPU should be
working on sc7280 / qcm4290.

With GPU device node enabled, adreno_bind failure is seen as the "speed_bin" was not populated on QCM6490 target which leads to display bind failure. Spoke with GPU team and on QCM6490 board, only CPU rendering is supported for now and there is no plan to enable GPU rendering in near future.

In this regard, what do you suggest

1) Disable GPU in QCM6490 DT (as per the current patch)
2) Disable GPU in the SoC DT, but enable it in other platform DTs. (This will prompt change in all the dt's and we don't have all the devices to test)

Please let me know your views on it.


Thanks,
Ritesh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux