[PATCH v4 00/11] arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset adds every node necessary for both the CRD and QCP to boot
with PCIe, USB and embedded DisplayPort.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Changes in v4:
- After a discussion off-list, it was suggested by Bjorn to split in separate patches.
- Addressed all of Konrad's comments, except of the clock-names one for the mdss,
  which there is nothing to be done about as all non-v5 do clk_bulk_get_all.
- Added more support to QCP, to be more aligned with CRD (except touchscreen
  and keyboard)
- Added a patch to fix some LDOs supplies on QCP
- Link to v3: https://lore.kernel.org/r/20231215-x1e80100-dts-missing-nodes-v3-0-c4e8d186adf2@xxxxxxxxxx

Changes in v3:
- Reword the commit messages
- Link to v2: https://lore.kernel.org/r/20231215-x1e80100-dts-missing-nodes-v2-0-5a6efc04d00c@xxxxxxxxxx

Changes in v2:
- Reword both commits to make it more clear nodes that are being added
- Dropped comments from interrupt maps from pcie nodes
- Replace all 0x0 with 0 in all reg properties
- Moved on separate lines reg, reset and clock names
- Dropped the sram and cpucp nodes
- Dropped pmic glink node
- Reordered all new clock controller nodes based on address
- Dropped unnecessary indent from touchpad and keyboard TLMM nodes
- Link to v1: https://lore.kernel.org/r/20231212-x1e80100-dts-missing-nodes-v1-0-1472efec2b08@xxxxxxxxxx

---
Abel Vesa (7):
      arm64: dts: qcom: x1e80100: Add TCSR node
      arm64: dts: qcom: x1e80100: Add USB nodes
      arm64: dts: qcom: x1e80100: Add PCIe nodes
      arm64: dts: qcom: x1e80100: Add display nodes
      arm64: dts: qcom: x1e80100-crd: Enable more support
      arm64: dts: qcom: x1e80100-qcp: Enable more support
      arm64: dts: qcom: x1e80100-qcp: Fix supplies for LDOs 3E and 2J

Sibi Sankar (4):
      arm64: dts: qcom: x1e80100: Add IPCC node
      arm64: dts: qcom: x1e80100: Add SMP2P nodes
      arm64: dts: qcom: x1e80100: Add QMP AOSS node
      arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes

 arch/arm64/boot/dts/qcom/x1e80100-crd.dts |  222 +++++
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts |  175 +++-
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    | 1349 ++++++++++++++++++++++++++++-
 3 files changed, 1739 insertions(+), 7 deletions(-)
---
base-commit: 853dab01a34378871b37a5e6a800e97a997fe16c
change-id: 20231201-x1e80100-dts-missing-nodes-a09f1ed99999

Best regards,
-- 
Abel Vesa <abel.vesa@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux