Add the bindings and driver changes for DSP support on the SM8650 platform in order to enable the aDSP, cDSP and MPSS subsystems to boot. Compared to SM8550, where SM8650 uses the same dual firmware files, (dtb file and main firmware) the memory zones requirement has changed: - cDSP: now requires 2 memory zones to be configured as shared between the cDSP and the HLOS subsystem - MPSS: In addition to the memory zone required for the SM8550 MPSS, two more are required to be configured for MPSS usage only. In order to handle this and avoid code duplication, the region_assign_* code patch has been made more generic and is able handle multiple DSP-only memory zones (for MPSS) or DSP-HLOS shared memory zones (cDSP) in the same region_assign functions. Dependencies: None For convenience, a regularly refreshed linux-next based git tree containing all the SM8650 related work is available at: https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- Changes in v7: - Rebased on v6.8-rc1 - Add another memory region for MPSS, in bindings, code and DT - Kepts Krzysztof's review on bindings after agreement on irc - Kept drivers patches reviews because it's only a miminal change (value 2 -> 3) - Link to v6: https://lore.kernel.org/r/20231218-topic-sm8650-upstream-remoteproc-v6-0-3d16b37f154b@xxxxxxxxxx Changes in v6: - Rebased on next-20231218, last patch did not apply anymore - Link to v5: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-remoteproc-v5-0-e749a1a48268@xxxxxxxxxx Changes in v5: - Rename _perms to _owners per Konrad suggestion - Link to v4: https://lore.kernel.org/r/20231208-topic-sm8650-upstream-remoteproc-v4-0-a96c3e5f0913@xxxxxxxxxx Changes in v4: - Collected review from Mukesh Ojha - Fixed adsp_unassign_memory_region() as suggested by Mukesh Ojha - Link to v3: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-remoteproc-v3-0-dbd4cabaeb47@xxxxxxxxxx Changes in v3: - Collected bindings review tags - Small fixes suggested by Mukesh Ojha - Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-remoteproc-v2-0-609ee572e0a2@xxxxxxxxxx Changes in v2: - Fixed sm8650 entries in allOf:if:then to match Krzysztof's comments - Collected reviewed-by on patch 3 - Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-remoteproc-v1-0-a8d20e4ce18c@xxxxxxxxxx --- Neil Armstrong (4): dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS remoteproc: qcom: pas: make region assign more generic remoteproc: qcom: pas: Add SM8650 remoteproc support arm64: dts: qcom: sm8650: add missing qlink_logging reserved memory for mpss .../bindings/remoteproc/qcom,sm8550-pas.yaml | 45 ++++++- arch/arm64/boot/dts/qcom/sm8650.dtsi | 8 +- drivers/remoteproc/qcom_q6v5_pas.c | 150 ++++++++++++++++----- 3 files changed, 167 insertions(+), 36 deletions(-) --- base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d change-id: 20231016-topic-sm8650-upstream-remoteproc-66a87eeb6fee Best regards, -- Neil Armstrong <neil.armstrong@xxxxxxxxxx>
