Re: [RFC] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/01/2024 19:21, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> I'm limiting the audience of this compared to the PCI power sequencing
> series as I wanted to run the DT part by the maintainers before I commit
> to a doomed effort.
> 
> Here is the DT representation of the QCA6390's PMU with its inputs and
> outputs. If I were to implement the pwrseq framework that would be able
> to assign the relevant pwrseq data to the consumer based on the actual
> regulators and not abstract bt-pwrseq or wlan-pwrseq properties - would
> that fly with you?
> 
> We'd need to deprecate the existing BT bindings but unfortunately they
> are already described as consuming the host PMIC regulators in bindings.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Please provide lore link to the binding.

Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux