Re: [PATCH 7/8] arm64: dts: qcom: msm8976: Declare and wire SDC pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024-01-21 20:41:05, Adam Skladowski wrote:
> Declare pinctrls for SDC pins and wire them to consumers.
> 
> Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>

Where'd the original sign-offs go?

https://lore.kernel.org/linux-arm-msm/20221214232049.703484-1-marijn.suijten@xxxxxxxxxxxxxx/

Thanks taking taking care of this SoC though.  My SM8976 Suzu device finally
emitted the magic smoke after rebasing on the latest MSM8976 patches, and will
need board repairs or a replacement before patches can be tested again :(

- Marijn

> ---
>  arch/arm64/boot/dts/qcom/msm8976.dtsi | 100 ++++++++++++++++++++++++++
>  1 file changed, 100 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> index 765c90ac14cb..5a7be93a0115 100644
> --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> @@ -771,6 +771,96 @@ blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
>  				drive-strength = <2>;
>  				bias-disable;
>  			};
> +
> +			sdc1_default: sdc1-default-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc1_sleep: sdc1-sleep-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc2_default: sdc2-default-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			sdc2_sleep: sdc2-sleep-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
>  		};
>  
>  		gcc: clock-controller@1800000 {
> @@ -1246,6 +1336,11 @@ sdhc_1: mmc@7824900 {
>  				 <&gcc GCC_SDCC1_APPS_CLK>,
>  				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
> +
> +			pinctrl-0 = <&sdc1_default>;
> +			pinctrl-1 = <&sdc1_sleep>;
> +			pinctrl-names = "default", "sleep";
> +
>  			status = "disabled";
>  		};
>  
> @@ -1262,6 +1357,11 @@ sdhc_2: mmc@7864900 {
>  				 <&gcc GCC_SDCC2_APPS_CLK>,
>  				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
> +
> +			pinctrl-0 = <&sdc2_default>;
> +			pinctrl-1 = <&sdc2_sleep>;
> +			pinctrl-names = "default", "sleep";
> +
>  			status = "disabled";
>  		};
>  
> -- 
> 2.43.0
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux