From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> [ Upstream commit c6d86aa8a12194d1c9c2f9108910a46c8a3ddc90 ] Change PM8058 node labels to start with pm8058_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@xxxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++-- arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 16 ++++++++-------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts index 569cbf0d8df8..94351c9bf94b 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts @@ -71,7 +71,7 @@ cm3605 { /* Trig on both edges - getting close or far away */ interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; /* MPP05 analog input to the XOADC */ - io-channels = <&xoadc 0x00 0x05>; + io-channels = <&pm8058_xoadc 0x00 0x05>; io-channel-names = "aout"; pinctrl-names = "default"; pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>; @@ -944,7 +944,7 @@ irq-pins { }; }; -&xoadc { +&pm8058_xoadc { /* Reference voltage 2.2 V */ xoadc-ref-supply = <&pm8058_l18>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 78023ed2fdf7..9217ced108c4 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -80,13 +80,13 @@ sleep-clk { */ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ + <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ }; soc: soc { @@ -390,7 +390,7 @@ pm8058_keypad: keypad@148 { row-hold = <91500>; }; - xoadc: xoadc@197 { + pm8058_xoadc: xoadc@197 { compatible = "qcom,pm8058-adc"; reg = <0x197>; interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; -- 2.43.0
