The serial ports did not have their interconnect paths specified when
they were first introduced. Fix that.
Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Suggested-by: Georgi Djakov <djakov@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 01e4dfc4babd..06f183ef8c78 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1028,6 +1028,12 @@ uart20: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart20_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
@@ -1420,6 +1426,12 @@ uart7: serial@99c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
};
---
base-commit: 8d04a7e2ee3fd6aabb8096b00c64db0d735bc874
change-id: 20240116-topic-8450serial-402fcb5e211b
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
