On 13.01.2024 21:55, Dmitry Baryshkov wrote:
> Define VBUS regulator and the Type-C handling block as present on the
> Quacomm PMI632 PMIC.
>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
> index 4eb79e0ce40a..d6832f0b7b80 100644
> --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
> @@ -45,6 +45,36 @@ pmic@2 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pmi632_vbus: usb-vbus-regulator@1100 {
> + compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
> + reg = <0x1100>;
> + status = "disabled";
> + };
> +
> + pmi632_typec: typec@1500 {
> + compatible = "qcom,pmi632-typec";
> + reg = <0x1500>;
> + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
This differs from the downstream irq types:
<0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
<0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;
Is it intended?
Thanks a lot for working on this!
Konrad
