Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 11, 2024 at 05:09:09AM -0600, Bartosz Golaszewski wrote:
> On Thu, 11 Jan 2024 11:42:11 +0100, Lukas Wunner <lukas@xxxxxxxxx> said:
> > On Wed, Jan 10, 2024 at 02:18:30PM -0600, Bartosz Golaszewski wrote:
> >> On Wed, 10 Jan 2024 17:41:05 +0100, Lukas Wunner <lukas@xxxxxxxxx> said:
> >> > On Wed, Jan 10, 2024 at 05:26:52PM +0100, Bartosz Golaszewski wrote:
> >> > > Seems like the following must be true but isn't in my case (from
> >> > > pci_bus_add_device()):
> >> > >
> >> > >     if (pci_is_bridge(dev))
> >> > >         of_pci_make_dev_node(dev);
> >> > >
> >> > > Shouldn't it evaluate to true for ports?
> >> >
> >> > It should.
> >> >
> >> > What does "lspci -vvvvxxxx -s BB:DD.F" say for the port in question?
> 
> # lspci -vvvvxxxx -s 0000:00:00
> 0000:00:00.0 PCI bridge: Qualcomm Technologies, Inc Device 010b
> (prog-if 00 [Normal decode])
> 	Device tree node: /sys/firmware/devicetree/base/soc@0/pcie@1c00000/pcie@0
[...]
> 00: cb 17 0b 01 07 05 10 00 00 00 04 06 00 00 01 00
                                                ^^
The Header Type in config space is 0x1, i.e. PCI_HEADER_TYPE_BRIDGE.

So pci_is_bridge(dev) does return true (unlike what you write above)
and control flow enters of_pci_make_dev_node().

But perhaps of_pci_make_dev_node() returns immediately because:

	/*
	 * If there is already a device tree node linked to this device,
	 * return immediately.
	 */
	if (pci_device_to_OF_node(pdev))
		return;

...and lspci does list a devicetree node for that Root Port.

In any case, of_pci_make_dev_node() is the right place to add
the call to of_platform_populate().  Just make sure it's called
even if there is already a DT node for the Root Port itself.

Thanks,

Lukas




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux