On 12/28/2023 7:26 PM, James Clark wrote:
On 28/12/2023 09:33, Mao Jinlong wrote:
Add coresight name support for custom names which will be
easy to identify the device by the name.
I suppose this is more of a V2 because the subject is the same as the
one sent earlier this year. But it looks like the discussion on the
previous one wasn't resolved.
I will make next patch as V2
With the main issues to solve being:
* It would be nice to use the existing root node name instead of adding
a new property. But at the same time DT nodes are supposed to have
generic names.
* This only works for DT and not ACPI
To me it seems like adding the new property is just a "cheat" to get
around not being allowed to have a specific name for the root node. But
if we admit that we need a name I don't see the benefit of not putting
the name where the node is already named.
Using the root node name at this point would also undo the hard coded
per-cpu naming of the CTI and ETM devices, so maybe it would be nice,
but it's just too late. That means that a new field is necessary.
Although that field could be a boolean like "use-root-name-for-display"
or something like that. In the end it probably doesn't really make a
difference whether it's that or a name string.
And maybe the answer to the ACPI question is just that if anyone needs
it, they can add it in the future. It doesn't seem like it would
conflict with anything we do here.
Signed-off-by: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
---
.../hwtracing/coresight/coresight-cti-core.c | 20 ++++++++------
drivers/hwtracing/coresight/coresight-dummy.c | 10 ++++---
.../hwtracing/coresight/coresight-platform.c | 27 +++++++++++++++++++
drivers/hwtracing/coresight/coresight-tpdm.c | 10 ++++---
include/linux/coresight.h | 1 +
5 files changed, 53 insertions(+), 15 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-cti-core.c b/drivers/hwtracing/coresight/coresight-cti-core.c
index 3999d0a2cb60..60a1e76064a9 100644
--- a/drivers/hwtracing/coresight/coresight-cti-core.c
+++ b/drivers/hwtracing/coresight/coresight-cti-core.c
@@ -902,14 +902,18 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id)
/* default to powered - could change on PM notifications */
drvdata->config.hw_powered = true;
- /* set up device name - will depend if cpu bound or otherwise */
- if (drvdata->ctidev.cpu >= 0)
- cti_desc.name = devm_kasprintf(dev, GFP_KERNEL, "cti_cpu%d",
- drvdata->ctidev.cpu);
- else
- cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev);
Can we put the new name stuff inside coresight_alloc_device_name()? Then
it happens by default for every device.
I know Suzuki said previously to do it per-device, but the new DT
property is just "coresight-name", so it's generic. Rather than being
specific like "cti-name". So I don't see the benefit of duplicating the
code at this point if we do decide to do it.
I will add it inside the coresight_alloc_device_name.
- if (!cti_desc.name)
- return -ENOMEM;
+ cti_desc.name = coresight_get_device_name(dev);
+ if (!cti_desc.name) {
+ /* set up device name - will depend if cpu bound or otherwise */
+ if (drvdata->ctidev.cpu >= 0)
+ cti_desc.name = devm_kasprintf(dev, GFP_KERNEL, "cti_cpu%d",
+ drvdata->ctidev.cpu);
+ else {
+ cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev);
+ if (!cti_desc.name)
+ return -ENOMEM;
+ }
+ }
/* setup CPU power management handling for CPU bound CTI devices. */
ret = cti_pm_setup(drvdata);
diff --git a/drivers/hwtracing/coresight/coresight-dummy.c b/drivers/hwtracing/coresight/coresight-dummy.c
index e4deafae7bc2..b19cd400df79 100644
--- a/drivers/hwtracing/coresight/coresight-dummy.c
+++ b/drivers/hwtracing/coresight/coresight-dummy.c
@@ -76,10 +76,12 @@ static int dummy_probe(struct platform_device *pdev)
struct coresight_desc desc = { 0 };
if (of_device_is_compatible(node, "arm,coresight-dummy-source")) {
-
- desc.name = coresight_alloc_device_name(&source_devs, dev);
- if (!desc.name)
- return -ENOMEM;
+ desc.name = coresight_get_device_name(dev);
+ if (!desc.name) {
+ desc.name = coresight_alloc_device_name(&source_devs, dev);
+ if (!desc.name)
+ return -ENOMEM;
+ }
desc.type = CORESIGHT_DEV_TYPE_SOURCE;
desc.subtype.source_subtype =
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
index 9d550f5697fa..284aa22a06b7 100644
--- a/drivers/hwtracing/coresight/coresight-platform.c
+++ b/drivers/hwtracing/coresight/coresight-platform.c
@@ -183,6 +183,18 @@ static int of_coresight_get_cpu(struct device *dev)
return cpu;
}
+static const char *of_coresight_get_device_name(struct device *dev)
+{
+ const char *name = NULL;
+
+ if (!dev->of_node)
+ return NULL;
+
+ of_property_read_string(dev->of_node, "coresight-name", &name);
Do you need to update the binding docs with this new property?
Yes. I will update the binding doc.
Also a minor nit: Maybe "display-name" is better? "Coresight" is
implied, and the node is already named, although that node name isn't
used for display purposes, but this one is.
From Suzuki's comments, "device-name" should be better. What do you think ?
Thanks
Jinlong Mao
