If cluster domain idle state is enabled on the RB1, the board becomes
significantly less responsive. Under certain circumstances (if some of
the devices are disabled in kernel config) the board can even lock up.
It seems this is caused by the MPM not being pinged during CPU idle (in
the same way the RPMh is pinged when cluster idle is entered).
Disable cluster domain idle for the RB1 board until MPM driver is fixed
to cooperate with the CPU idle states.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index aa53b6af6d9c..9a0308ef8b0f 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -177,6 +177,24 @@ vph_pwr: regulator-vph-pwr {
};
};
+&CPU_PD0 {
+ /delete-property/ power-domains;
+};
+
+&CPU_PD1 {
+ /delete-property/ power-domains;
+};
+
+&CPU_PD2 {
+ /delete-property/ power-domains;
+};
+
+&CPU_PD3 {
+ /delete-property/ power-domains;
+};
+
+/delete-node/ &CLUSTER_PD;
+
&gpi_dma0 {
status = "okay";
};
---
base-commit: 39676dfe52331dba909c617f213fdb21015c8d10
change-id: 20240111-qrb2210-rb1-no-cluster-idle-7bf43b3a0452
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
