On 3.12.15 г. 16:02, Georgi Djakov wrote: > This adds initial support for clocks controlled by the Resource > Power Manager (RPM) processor on some Qualcomm SoCs, which use > the qcom_smd_rpm driver to communicate with RPM. > Such platforms are msm8916, apq8084 and msm8974. > > The RPM is a dedicated hardware engine for managing the shared > SoC resources in order to keep the lowest power profile. It > communicates with other hardware subsystems via shared memory > and accepts clock requests, aggregates the requests and turns > the clocks on/off or scales them on demand. > > This driver is based on the codeaurora.org driver: > https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c > > Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx> > --- [..] > --- a/drivers/clk/qcom/Kconfig > +++ b/drivers/clk/qcom/Kconfig > @@ -2,6 +2,9 @@ config QCOM_GDSC > bool > select PM_GENERIC_DOMAINS if PM > > +config QCOM_RPMCC > + bool > + > config COMMON_CLK_QCOM > tristate "Support for Qualcomm's clock controllers" > depends on OF > @@ -9,6 +12,14 @@ config COMMON_CLK_QCOM > select REGMAP_MMIO > select RESET_CONTROLLER > > +config QCOM_CLK_SMD_RPM > + tristate "RPM over SMD based Clock Controller" > + depends on COMMON_CLK_QCOM This should be: depends on COMMON_CLK_QCOM && QCOM_SMD_RPM And also for patch 3/6 it should be && MFD_QCOM_RPM Will resend. > + select QCOM_RPMCC > + help > + Support for the clocks exposed by the Resource Power Manager > + processor on devices like apq8016, apq8084 and msm8974. > + > config APQ_GCC_8084 > tristate "APQ8084 Global Clock Controller" > select QCOM_GDSC -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html