When num-channels and qcom,num-ees is not provided in devicetree, the
driver will try to read these values from the registers during probe but
this fails if the interconnect is not on and then crashes the system.
So we can provide these properties in devicetree (queried after patching
BAM driver to enable the necessary interconnect) so we can probe
cryptobam without reading registers and then also use the QCE as
expected.
Fixes: 4d29db204361 ("arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot")
Fixes: f1040a7fe8f0 ("arm64: dts: qcom: sm8350: Add Crypto Engine support")
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
Not tested myself, but David Heidelberg was so nice and ran it on a
SM8350 board in a test farm and it seems to be working as expected.
But still please test it on some other boards so make sure it actually
works as expected there also.
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b46236235b7f..3cd75ab552c5 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1754,10 +1754,10 @@ cryptobam: dma-controller@1dc4000 {
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
+ num-channels = <16>;
+ qcom,num-ees = <4>;
iommus = <&apps_smmu 0x594 0x0011>,
<&apps_smmu 0x596 0x0011>;
- /* FIXME: Probing BAM DMA causes some abort and system hang */
- status = "fail";
};
crypto: crypto@1dfa000 {
@@ -1769,8 +1769,6 @@ crypto: crypto@1dfa000 {
<&apps_smmu 0x596 0x0011>;
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "memory";
- /* FIXME: dependency BAM DMA is disabled */
- status = "disabled";
};
ipa: ipa@1e40000 {
---
base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a
change-id: 20240108-sm8350-qce-6ada49f90657
Best regards,
--
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
