[PATCH v2 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
two I2C master controllers for each CCI.

The CCI I2C pins are not muxed so we define them in the dtsi.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 316 +++++++++++++++++++++++++++++++++
 1 file changed, 316 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index febf28356ff8..2d7ae19dda3a 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3451,6 +3451,162 @@ usb_1_role_switch: endpoint {
 			};
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac4c000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4c000 0 0x1000>;
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac4d000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4d000 0 0x1000>;
+			interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci3_default>;
+			pinctrl-1 = <&cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc8280xp-camcc";
 			reg = <0 0x0ad00000 0 0x20000>;
@@ -4076,6 +4232,166 @@ tlmm: pinctrl@f100000 {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 230>;
 			wakeup-parent = <&pdc>;
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci2_default: cci2-default-state {
+				cci2_i2c0_default: cci2-i2c0-default-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci2_i2c1_default: cci2-i2c1-default-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				cci2_i2c0_sleep: cci2-i2c0-sleep-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci2_i2c1_sleep: cci2-i2c1-sleep-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci3_default: cci3-default-state {
+				cci3_i2c0_default: cci3-i2c0-default-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci3_i2c1_default: cci3-i2c1-default-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				cci3_i2c0_sleep: cci3-i2c0-sleep-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci3_i2c1_sleep: cci3-i2c1-sleep-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {

-- 
2.42.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux