[PATCH v3 4/9] arm64: dts: qcom: qcs404: Drop RPM bus clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some nodes are abusingly referencing some of the internal bus clocks,
that were recently removed in Linux (because the original implementation
did not make much sense), managing them as if they were the only devices
on an NoC bus.

These clocks are now handled from within the icc framework and are
no longer registered from within the CCF. Remove them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 6ac64ce9bb68..2f2eeaf2e945 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -558,9 +558,6 @@ bimc: interconnect@400000 {
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@ pcnoc: interconnect@500000 {
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux