In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e78c83a897c2..1c6f80b14d09 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1847,6 +1847,7 @@ gpu: gpu@3d00000 {
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
+ #cooling-cells = <2>;
status = "disabled";
@@ -4214,8 +4215,15 @@ gpu-top-thermal {
thermal-sensors = <&tsens1 1>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_top_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu1_alert0: trip-point0 {
+ gpu_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <1000>;
type = "hot";
@@ -4229,8 +4237,15 @@ gpu-bottom-thermal {
thermal-sensors = <&tsens1 2>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_bottom_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu2_alert0: trip-point0 {
+ gpu_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <1000>;
type = "hot";
--
2.43.0
