On Thu, Dec 21, 2023 at 12:25:25PM -0600, Andrew Halaney wrote: > Currently, interrupts are cleared and disabled prior to registering the > interrupt. An mb() is used to complete the clear/disable writes before > the interrupt is registered. > > mb() ensure that the write completes, but completion doesn't mean that > it isn't stored in a buffer somewhere. The recommendation for > ensuring these bits have taken effect on the device is to perform a read > back to force it to make it all the way to the device. This is > documented in device-io.rst and a talk by Will Deacon on this can > be seen over here: > > https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 > > Let's do that to ensure these bits hit the device. Because the mb()'s > purpose wasn't to add extra ordering (on top of the ordering guaranteed > by writel()/readl()), it can safely be removed. > > Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts") > Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx> Same comment as patch 07/11. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> - Mani > --- > drivers/ufs/core/ufshcd.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c > index 7bfb556e5b8e..bb603769b029 100644 > --- a/drivers/ufs/core/ufshcd.c > +++ b/drivers/ufs/core/ufshcd.c > @@ -10568,7 +10568,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) > * Make sure that UFS interrupts are disabled and any pending interrupt > * status is cleared before registering UFS interrupt handler. > */ > - mb(); > + ufshcd_readl(hba, REG_INTERRUPT_ENABLE); > > /* IRQ registration */ > err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); > > -- > 2.43.0 > -- மணிவண்ணன் சதாசிவம்
