[PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add additional property info needed for DSIv2 DT.

Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Rob Herring <robh@xxxxxxxxxx>

Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index e097955..e7423be 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -21,10 +21,13 @@ Required properties:
   * "byte_clk"
   * "pixel_clk"
   * "core_clk"
+  For DSIv2, we need an additional clock:
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +54,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux