Re: [PATCH 6/8] arm64: dts: qcom: sa8295p-adp: add max20411

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 21, 2023 at 01:51:58PM +0100, Konrad Dybcio wrote:
> On 21.12.2023 04:50, Bjorn Andersson wrote:
> > From: Bjorn Andersson <andersson@xxxxxxxxxx>
> > 
> > The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
> > VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
> > bus.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 40 ++++++++++++++++++++++++++++++++
> >  1 file changed, 40 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> > index fd253942e5e5..e16406c9c19d 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> > @@ -266,6 +266,26 @@ &dispcc1 {
> >  	status = "okay";
> >  };
> >  
> > +&i2c12 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&qup1_i2c4_state>;
> property-n
> property-names
> 
> (same below)
> > +
> > +	status = "okay";
> > +
> > +	vdd_gfx: regulator@39 {
> > +		compatible = "maxim,max20411";
> > +		reg = <0x39>;
> > +
> > +		regulator-min-microvolt = <800000>;
> > +		regulator-max-microvolt = <968750>;
> Is this ever going to be scaled? I suppose you could add some OPP code to
> drm/msm and use opp-microvolts.. Or lock this down at min=max
> 

Downstream leave it at 0.8V, so let's lock it down for now.

Regards,
Bjorn

> Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux