Re: [PATCH v2 00/34] Qualcomm video encoder and decoder driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry and Krzysztof

On 12/20/2023 1:52 AM, Dmitry Baryshkov wrote:
On Wed, 20 Dec 2023 at 10:53, Vikash Garodia <quic_vgarodia@xxxxxxxxxxx> wrote:

On 12/20/2023 2:09 PM, Dmitry Baryshkov wrote:
On Wed, 20 Dec 2023 at 10:14, Vikash Garodia <quic_vgarodia@xxxxxxxxxxx> wrote:

Hi,

On 12/20/2023 1:07 PM, Dmitry Baryshkov wrote:
On Wed, 20 Dec 2023 at 08:32, Vikash Garodia <quic_vgarodia@xxxxxxxxxxx> wrote:

Hi Dmitry,

On 12/19/2023 12:08 AM, Dmitry Baryshkov wrote:
On 18/12/2023 13:31, Dikshita Agarwal wrote:
This patch series introduces support for Qualcomm new video acceleration
hardware architecture, used for video stream decoding/encoding. This driver
is based on new communication protocol between video hardware and application
processor.

This doesn't answer one important point, you have been asked for v1. What is the
actual change point between Venus and Iris? What has been changed so much that
it demands a separate driver. This is the main question for the cover letter,
which has not been answered so far.

 From what I see from you bindings, the hardware is pretty close to what we see
in the latest venus generations. I asssme that there was a change in the vcodec
inteface to the firmware and other similar changes. Could you please point out,
which parts of Venus driver do no longer work or are not applicable for sm8550

The motivation behind having a separate IRIS driver was discussed earlier in [1]
In the same discussion, it was ellaborated on how the impact would be with
change in the new firmware interface and other video layers in the driver. I can
add this in cover letter in the next revision.

Ok. So the changes cover the HFI interface. Is that correct?
Change wise, yes.

We see some duplication of code and to handle the same, the series brings in a
common code reusability between iris and venus. Aligning the common peices of
venus and iris will be a work in progress, once we land the base driver for iris.

This is not how it usually works. Especially not with the patches you
have posted.

I have the following suggestion how this story can continue:
You can _start_ by reworking venus driver, separating the HFI /
firmware / etc interface to an internal interface in the driver. Then
implement Iris as a plug in for that interface. I might be mistaken
here, but I think this is the way how this can be beneficial for both
the video en/decoding on both old and new platforms.

HFI/firmware interface is already confined to HFI layer in the existing venus
driver. We explained in the previous discussion [1], on how the HFI change
impacts the other layers by taking example of a DRC usecase. Please have a look
considering the usecase and the impact it brings to other layers in the driver.

I have looked at it. And I still see huge change in the interface
side, but it doesn't tell me about the hardware changes.

I hope you noticed how the common layers like decoder, response, state layers
are impacted in handling one of usecase. Now add that to all the different
scenarios like seek, drain, DRC during seek, DRC during drain, etc.

Yes, for sure.


Have you evaluated the other opportunity?

To have a common platform interface and firmware-specific backend?

You have already done a part of it, but from a different perspective.
You have tried to move common code out of the driver. Instead we are
asking you to do a different thing. Move non-common code within the
driver. Then add your code on top of that.

For common platform - yes, we are bringing in common stuff like PIL.
Other than that, abstraction to firmware interface is not that confined to one
layer. It spreads over decoder/encoder/common layers. Now when majority of the
layers/code is different, we planned to make it in parallel to venus and have a
common layer having common things to both iris and venus.

My suggestion still holds. Start with this common platform code.
Rather than arguing back and forth, could you please perform an
experiment on the current venus driver and move firmware interface to
subdirs, leaving just the platform / PIL / formats / etc in place?
This will at least allow us to determine whether it is a feasible
concept or not.


Your comments are valid. The platform driver piece and some other pieces still are common between venus and iris despite this initial effort of moving common pieces out. I have also seen this from whatever I have reviewed.

Video team also acknowledges this part and internally I think they did evaluate this option and their feedback was, the more and more they changed, they were touching pretty much every file of venus.

The missing piece i think in all this discussion is that in addition to the forward channel, the reverse channel of HFI, based on which the rest of the video state machine changes should also be considered.

So even with respect to the code layout, its not just the forward communication but the backwards communication of fw--->hfi--->codec is becoming a challenge as the venus layers seem to only work with the hfi of venus.

For adding support for the new HFI events/communication, it was getting harder to extend venus.

What I certainly acknowledge is now with iris whether this can be dealt with better for future chipsets to avoid another re-write for another HFI as that will be too much of maintenance cost.

I will let the video team comment on this part.

Thanks

Abhinav







[1] https://lore.kernel.org/lkml/8c97d866-1cab-0106-4ab3-3ca070945ef7@xxxxxxxxxxx/
Short rationale:
The venus driver has a history of supported platforms. There is
already some kind of buffer management in place. Both developers and
testers have spent their effort on finding issues there. Sending new
driver means that we have to spend the same amount of efforts on this.
Moreover, even from the porter point of view. You are creating new
bindings for the new hardware. Which do not follow the
venus-common.yaml. And they do not follow the defined bindings for the
recent venus platforms. Which means that as a developer I have to care
about two different ways to describe nearly the same hardware.>> Again qualcomm video team does not have a plan to support sm8550/x1e80100 on
venus as the changes are too interleaved to absorb in venus driver. And there is
significant interest in community to start validating video driver on sm8550 or
x1e80100.

[1] https://lore.kernel.org/lkml/8c97d866-1cab-0106-4ab3-3ca070945ef7@xxxxxxxxxxx/

Regards,
Vikash













[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux