[PATCH v5] dt-bindings: iommu: Convert msm,iommu-v0 to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert Qualcomm IOMMU v0 implementation to yaml format.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
v5:
 - updated example (thx @Konrad)
 - ordering of requirements + dropped > and | and reformatted (thx @Konrad)
v4:
 - renamed to qcom,apq8064-iommu as Rob requested
 - changed title to Qualcomm APQ8064 IOMMU
 - dropped quotes around URLs
 - dropped mdp node
 - dropped unused mdp_port0 label

v3:
 - I kept the name as -v0, since we have other binding -v1 and it look
   good, I can change thou in v4 if requested.
 - dropped non-existent smmu_clk part (and adjusted example, which was
   using it)
 - dropped iommu description
 - moved iommu-cells description to the property #iommu-cells

v2:
 - fix wrong path in binding $id
 - comment qcom,mdp4 node example (we don't want to validate it yet)

 .../bindings/iommu/msm,iommu-v0.txt           | 64 ---------------
 .../bindings/iommu/qcom,apq8064-iommu.yaml    | 82 +++++++++++++++++++
 2 files changed, 82 insertions(+), 64 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
 create mode 100644 Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml

diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
deleted file mode 100644
index 20236385f26e..000000000000
--- a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* QCOM IOMMU
-
-The MSM IOMMU is an implementation compatible with the ARM VMSA short
-descriptor page tables. It provides address translation for bus masters outside
-of the CPU, each connected to the IOMMU through a port called micro-TLB.
-
-Required Properties:
-
-  - compatible: Must contain "qcom,apq8064-iommu".
-  - reg: Base address and size of the IOMMU registers.
-  - interrupts: Specifiers for the MMU fault interrupts. For instances that
-    support secure mode two interrupts must be specified, for non-secure and
-    secure mode, in that order. For instances that don't support secure mode a
-    single interrupt must be specified.
-  - #iommu-cells: The number of cells needed to specify the stream id. This
-		  is always 1.
-  - qcom,ncb:	  The total number of context banks in the IOMMU.
-  - clocks	: List of clocks to be used during SMMU register access. See
-		  Documentation/devicetree/bindings/clock/clock-bindings.txt
-		  for information about the format. For each clock specified
-		  here, there must be a corresponding entry in clock-names
-		  (see below).
-
-  - clock-names	: List of clock names corresponding to the clocks specified in
-		  the "clocks" property (above).
-		  Should be "smmu_pclk" for specifying the interface clock
-		  required for iommu's register accesses.
-		  Should be "smmu_clk" for specifying the functional clock
-		  required by iommu for bus accesses.
-
-Each bus master connected to an IOMMU must reference the IOMMU in its device
-node with the following property:
-
-  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
-	    phandle to the IOMMU and the second cell is the stream id.
-	    A single master device can be connected to more than one iommu
-	    and multiple contexts in each of the iommu. So multiple entries
-	    are required to list all the iommus and the stream ids that the
-	    master is connected to.
-
-Example: mdp iommu and its bus master
-
-                mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "smmu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 0>,
-			    <GIC_SPI 64 0>;
-			qcom,ncb = <2>;
-		};
-
-		mdp: qcom,mdp@5100000 {
-			compatible = "qcom,mdp";
-			...
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2>;
-		};
diff --git a/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml
new file mode 100644
index 000000000000..5af59305d277
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iommu/qcom,apq8064-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APQ8064 IOMMU
+
+maintainers:
+  - Will Deacon <will@xxxxxxxxxx>
+
+description:
+  The MSM IOMMU is an implementation compatible with the ARM VMSA short
+  descriptor page tables. It provides address translation for bus masters
+  outside of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    const: qcom,apq8064-iommu
+
+  clocks:
+    items:
+      - description: interface clock for register accesses
+      - description: functional clock for bus accesses
+
+  clock-names:
+    items:
+      - const: smmu_pclk
+      - const: iommu_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifiers for the MMU fault interrupts.
+    minItems: 1
+    items:
+      - description: non-secure mode interrupt
+      - description: secure mode interrupt (for instances which supports it)
+
+  "#iommu-cells":
+    const: 1
+    description:
+      The first cell is a phandle to the IOMMU and the second cell
+      is the stream id.
+      A single master device can be connected to more than one iommu
+      and multiple contexts in each of the iommu.
+      So multiple entries are required to list all the iommus and
+      the stream ids that the master is connected to.
+
+  qcom,ncb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The total number of context banks in the IOMMU.
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - qcom,ncb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu@7500000 {
+            compatible = "qcom,apq8064-iommu";
+            reg = <0x07500000 0x100000>;
+            interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk SMMU_AHB_CLK>,
+                     <&clk MDP_AXI_CLK>;
+            clock-names = "smmu_pclk",
+                          "iommu_clk";
+            #iommu-cells = <1>;
+            qcom,ncb = <2>;
+    };
-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux