On 23-12-15 00:35:38, Abel Vesa wrote:
> Enable touchscreen, touchpad, keyboard, display, pcie and usb
> and all related nodes.
Urgh, type in subject. I'll rephrase it anyway in the next version.
Please ignore this version.
>
> Co-developed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> Co-developed-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
> Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 221 ++++++++++++++++++++++++++++++
> 1 file changed, 221 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index 7532d8eca2de..d44898453315 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -401,10 +401,144 @@ vreg_l3j_0p8: ldo3 {
> };
> };
>
> +&i2c0 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +
> + touchpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tpad_default>;
> +
> + wakeup-source;
> + };
> +
> + keyboard@3a {
> + compatible = "hid-over-i2c";
> + reg = <0x3a>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kybd_default>;
> + wakeup-source;
> + };
> +};
> +
> +&i2c8 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +
> + touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&ts0_default>;
> + };
> +};
> +
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_dp3 {
> + compatible = "qcom,x1e80100-dp";
> + /delete-property/ #sound-dai-cells;
> +
> + data-lanes = <0 1 2 3>;
> +
> + status = "okay";
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + power-supply = <&vreg_edp_3p3>;
> +
> + port {
> + edp_panel_in: endpoint {
> + remote-endpoint = <&mdss_dp3_out>;
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss_dp3_out: endpoint {
> + remote-endpoint = <&edp_panel_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss_dp3_phy {
> + vdda-phy-supply = <&vreg_l3j_0p8>;
> + vdda-pll-supply = <&vreg_l2j_1p2>;
> +
> + status = "okay";
> +};
> +
> +&pcie4 {
> + status = "okay";
> +};
> +
> +&pcie4_phy {
> + vdda-phy-supply = <&vreg_l3j_0p8>;
> + vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&pcie6a {
> + status = "okay";
> +};
> +
> +&pcie6a_phy {
> + vdda-phy-supply = <&vreg_l3j_0p8>;
> + vdda-pll-supply = <&vreg_l2j_1p2>;
> +
> + status = "okay";
> +};
> +
> +&qupv3_0 {
> + status = "okay";
> +};
> +
> +&qupv3_1 {
> + status = "okay";
> +};
> +
> &qupv3_2 {
> status = "okay";
> };
>
> +&remoteproc_adsp {
> + firmware-name = "qcom/x1e80100/adsp.mbn",
> + "qcom/x1e80100/adsp_dtb.mbn";
> +
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + firmware-name = "qcom/x1e80100/cdsp.mbn",
> + "qcom/x1e80100/cdsp_dtb.mbn";
> +
> + status = "okay";
> +};
> +
> &tlmm {
> gpio-reserved-ranges = <34 2>, /* Unused */
> <44 4>, /* SPI (TPM) */
> @@ -416,9 +550,96 @@ edp_reg_en: edp-reg-en-state {
> drive-strength = <16>;
> bias-disable;
> };
> +
> + kybd_default: kybd-default-state {
> + pins = "gpio67";
> + function = "gpio";
> + bias-disable;
> + };
> +
> + tpad_default: tpad-default-state {
> + pins = "gpio3";
> + function = "gpio";
> + bias-disable;
> + };
> +
> + ts0_default: ts0-default-state {
> + int-n-pins {
> + pins = "gpio51";
> + function = "gpio";
> + bias-disable;
> + };
> +
> + reset-n-pins {
> + pins = "gpio48";
> + function = "gpio";
> + output-high;
> + drive-strength = <16>;
> + };
> + };
> };
>
> &uart21 {
> compatible = "qcom,geni-debug-uart";
> status = "okay";
> };
> +
> +&usb_1_ss0_hsphy {
> + vdd-supply = <&vreg_l2e_0p8>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss0_qmpphy {
> + status = "okay";
> +};
> +
> +&usb_1_ss0 {
> + status = "okay";
> +};
> +
> +&usb_1_ss0_dwc3 {
> + dr_mode = "host";
> + usb-role-switch;
> +};
> +
> +&usb_1_ss1_hsphy {
> + vdd-supply = <&vreg_l2e_0p8>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss1_qmpphy {
> + status = "okay";
> +};
> +
> +&usb_1_ss1 {
> + status = "okay";
> +};
> +
> +&usb_1_ss1_dwc3 {
> + dr_mode = "host";
> + usb-role-switch;
> +};
> +
> +&usb_1_ss2_hsphy {
> + vdd-supply = <&vreg_l2e_0p8>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss2_qmpphy {
> + status = "okay";
> +};
> +
> +&usb_1_ss2 {
> + status = "okay";
> +};
> +
> +&usb_1_ss2_dwc3 {
> + dr_mode = "host";
> + usb-role-switch;
> +};
>
> --
> 2.34.1
>
