Conor Dooley писал(а) 12.12.2023 22:24: > Hey, > > On Tue, Dec 12, 2023 at 05:49:09PM +0500, Nikita Travkin wrote: >> Add binding for the EC found in the Acer Aspire 1 laptop. >> >> Signed-off-by: Nikita Travkin <nikita@xxxxxxx> >> --- >> .../bindings/power/supply/acer,aspire1-ec.yaml | 67 ++++++++++++++++++++++ >> 1 file changed, 67 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/power/supply/acer,aspire1-ec.yaml b/Documentation/devicetree/bindings/power/supply/acer,aspire1-ec.yaml >> new file mode 100644 >> index 000000000000..1fbf1272a00f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/power/supply/acer,aspire1-ec.yaml >> @@ -0,0 +1,67 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/power/supply/acer,aspire1-ec.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Acer Aspire 1 Embedded Controller >> + >> +maintainers: >> + - Nikita Travkin <nikita@xxxxxxx> >> + >> +description: >> + The Acer Aspire 1 laptop uses an embedded controller to control battery >> + and charging as well as to provide a set of misc features such as the >> + laptop lid status and HPD events for the USB Type-C DP alt mode. >> + >> +properties: >> + compatible: >> + const: acer,aspire1-ec >> + >> + reg: >> + const: 0x76 >> + >> + interrupts: >> + maxItems: 1 >> + >> + acer,media-keys-on-top: >> + description: Configure the keyboard layout to use media features of >> + the fn row when the fn key is not pressed. The firmware may choose >> + to add this property when user selects the fn mode in the firmware >> + setup utility. > > I'm not a huge fan of the property name/description here. > For the description, I'm not sure from reading this what the default > behaviour is and how the fn row works when the fn key is pressed. > Is the default behaviour that pressing the fn key enables the media keys > and the row by default provides the fn functionality? And then when this > option is set in firmware the behaviour is inverted? > Yes. By default pressing i.e. F11 would create F11, Fn+F11 would be vol+. With this option set, the default for F11 would be vol+ and Fn+f11 would be F11. Perhaps this description would be better? Configure the keyboard layout to invert the Fn key. By default the function row of the keyboard inputs function keys (i.e F11) when Fn is not pressed. With this option set, pressing the key without Fn would input media keys (i.e. Vol-Up). Firmware may (...) > For the name, the "on-top" bit seems a bit weird. I would prefer it to > be reworded in terms of the behavioural change of the fn key. The media > keys are physically at the top of the keyboard whether or not this > option is enabled, hence the "on-top" seeming a bit weird to me. > I was trying to be unambiguous with this name without making it too long. The implied meaning of "on-top" was "On the top keyboard layer" (in the opposition of the "Fn" layer). Perhaps "acer,media-keys-on-top-layer" would have been better then? I was trying to define this property via the word "media" since using "fn" is somewhat ambiguous (fn row key vs F(1..12) key vs Fn key), and something like `inverted-fn-key" would not reflect what is the impact on the layout. Using "fn-selects-function-keys" also felt a bit ambiguous to me. FWIW I can also invert the default and make it "fn-selects-media-keys" which would be clear. I haven't yet written the firmware that would pass this property from the setup so it shouldn't be a problem from the DT POV, but this is not the "reset" default for the EC. Do any of those suggestions sound better to you? Nikita > Thanks, > Conor. > >> + type: boolean >> + >> + connector: >> + $ref: /schemas/connector/usb-connector.yaml# >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + >> +additionalProperties: false >> + >> +examples: >> + - |+ >> + #include <dt-bindings/interrupt-controller/irq.h> >> + i2c { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + embedded-controller@76 { >> + compatible = "acer,aspire1-ec"; >> + reg = <0x76>; >> + >> + interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>; >> + >> + connector { >> + compatible = "usb-c-connector"; >> + >> + port { >> + ec_dp_in: endpoint { >> + remote-endpoint = <&mdss_dp_out>; >> + }; >> + }; >> + }; >> + }; >> + }; >> >> -- >> 2.43.0 >>
