Add all missing nodes for the X1E80100 CRD reference device.
Co-developed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Co-developed-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 303 ++++++++++++++++++++++++++++++
1 file changed, 303 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index c209ae59c6b5..4f7f83d49847 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -22,6 +22,72 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_role_switch>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_role_switch>;
+ };
+ };
+ };
+ };
+
+ connector@2 {
+ compatible = "usb-c-connector";
+ reg = <2>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss2_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_role_switch>;
+ };
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
@@ -403,10 +469,144 @@ vreg_l3j_0p8: ldo3 {
};
};
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpad_default>;
+
+ wakeup-source;
+ };
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&kybd_default>;
+ wakeup-source;
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp3 {
+ compatible = "qcom,x1e80100-dp";
+ /delete-property/ #sound-dai-cells;
+
+ data-lanes = <0 1 2 3>;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss_dp3_out: endpoint {
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
&qupv3_2 {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/adsp.mbn",
+ "qcom/x1e80100/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/cdsp.mbn",
+ "qcom/x1e80100/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <34 2>, /* Unused */
<44 4>, /* SPI (TPM) */
@@ -418,9 +618,112 @@ edp_reg_en: edp-reg-en-state {
drive-strength = <16>;
bias-disable;
};
+
+ kybd_default: kybd-default-state {
+ int-n-pins {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ tpad_default: tpad-default-state {
+ int-n-pins {
+ pins = "gpio3";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
};
&uart21 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+ usb-role-switch;
+};
+
+&usb_1_ss0_role_switch {
+ remote-endpoint = <&pmic_glink_ss0_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+ usb-role-switch;
+};
+
+&usb_1_ss1_role_switch {
+ remote-endpoint = <&pmic_glink_ss1_in>;
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+ status = "okay";
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "host";
+ usb-role-switch;
+};
+
+&usb_1_ss2_role_switch {
+ remote-endpoint = <&pmic_glink_ss2_in>;
+};
--
2.34.1
