[PATCH v8 08/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Bao D. Nguyen" <quic_nguyenb@xxxxxxxxxxx>

Start from HW ver 5, a spare register in UFS host controller is added and
used to indicate the UFS device version. The spare register is populated by
bootloader for now, but in future it will be populated by HW automatically
during link startup with its best efforts in any boot stage prior to Linux.

During host driver init, read the spare register, if it is not populated
with a UFS device version, go ahead with the dual init mechanism. If a UFS
device version is in there, use the UFS device version together with host
controller's HW version to decide the proper PHY gear which should be used
to configure the UFS PHY without going through the second init.

Signed-off-by: Bao D. Nguyen <quic_nguyenb@xxxxxxxxxxx>
Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
---

v7 -> v8:
Fixed a BUG introduced from v6 -> v7. The spare register is added since HW ver 5, hence exclude HW ver == 4.

---
 drivers/ufs/host/ufs-qcom.c | 35 ++++++++++++++++++++++++++++-------
 drivers/ufs/host/ufs-qcom.h |  4 ++++
 2 files changed, 32 insertions(+), 7 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index ee3f07a..968a4c0 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1065,17 +1065,38 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host)
 {
 	struct ufs_host_params *host_params = &host->host_params;
+	u32 val, dev_major;
 
 	host->phy_gear = host_params->hs_tx_gear;
 
-	/*
-	 * For controllers whose major HW version is < 4, power up the PHY using
-	 * minimum supported gear (UFS_HS_G2). Switching to max gear will be
-	 * performed during reinit if supported. For newer controllers, whose
-	 * major HW version is >= 4, power up the PHY using max supported gear.
-	 */
-	if (host->hw_ver.major < 0x4)
+	if (host->hw_ver.major < 0x4) {
+		/*
+		 * For controllers whose major HW version is < 4, power up the
+		 * PHY using minimum supported gear (UFS_HS_G2). Switching to
+		 * max gear will be performed during reinit if supported.
+		 * For newer controllers, whose major HW version is >= 4, power
+		 * up the PHY using max supported gear.
+		 */
 		host->phy_gear = UFS_HS_G2;
+	} else if (host->hw_ver.major >= 0x5) {
+		val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG);
+		dev_major = FIELD_GET(UFS_DEV_VER_MAJOR_MASK, val);
+
+		/*
+		 * Since the UFS device version is populated, let's remove the
+		 * REINIT quirk as the negotiated gear won't change during boot.
+		 * So there is no need to do reinit.
+		 */
+		if (dev_major != 0x0)
+			host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH;
+
+		/*
+		 * For UFS 3.1 device and older, power up the PHY using HS-G4
+		 * PHY gear to save power.
+		 */
+		if (dev_major > 0x0 && dev_major < 0x4)
+			host->phy_gear = UFS_HS_G4;
+	}
 }
 
 static void ufs_qcom_set_host_params(struct ufs_hba *hba)
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 11419eb..32e51d9 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -23,6 +23,8 @@
 #define UFS_HW_VER_MINOR_MASK	GENMASK(27, 16)
 #define UFS_HW_VER_STEP_MASK	GENMASK(15, 0)
 
+#define UFS_DEV_VER_MAJOR_MASK	GENMASK(7, 4)
+
 /* vendor specific pre-defined parameters */
 #define SLOW 1
 #define FAST 2
@@ -54,6 +56,8 @@ enum {
 	UFS_AH8_CFG				= 0xFC,
 
 	REG_UFS_CFG3				= 0x271C,
+
+	REG_UFS_DEBUG_SPARE_CFG			= 0x284C,
 };
 
 /* QCOM UFS host controller vendor specific debug registers */
-- 
2.7.4





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux