This set of patches adds support for the QCOM DWC3 phys found on various Qualcomm platforms. The PHY portion of this set was originally part of: https://lkml.org/lkml/2014/9/12/597 The applicable review comments were fixed and additional changes were made to accomodate the TCSR phy mux selection required to get working ports. Andy Gross (4): phy: Add Qualcomm DWC3 HS/SS PHY driver usb: dwc3: qcom: Configure TCSR phy mux register ARM: dts: qcom: Add DWC3 USB support on IPQ8064 Documentation: usb: dwc3: qcom: Add TCSR mux usage .../devicetree/bindings/usb/qcom,dwc3.txt | 11 + arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 24 + arch/arm/boot/dts/qcom-ipq8064.dtsi | 89 ++++ drivers/phy/Kconfig | 11 + drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-dwc3.c | 483 +++++++++++++++++++++ drivers/usb/dwc3/dwc3-qcom.c | 25 ++ 7 files changed, 644 insertions(+) create mode 100644 drivers/phy/phy-qcom-dwc3.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
