SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
Update configure SGMII function with rx clk divider programming.
Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Signed-off-by: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
---
v2 changelog:
- Use FIELD_PREP to prepare bifield values in place of GENMASK
- Add fixes tag
---
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index d3bf42d0fceb..df6ff8bcdb5c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -34,6 +34,7 @@
#define RGMII_CONFIG_LOOPBACK_EN BIT(2)
#define RGMII_CONFIG_PROG_SWAP BIT(1)
#define RGMII_CONFIG_DDR_MODE BIT(0)
+#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)
/* SDCC_HC_REG_DLL_CONFIG fields */
#define SDCC_DLL_CONFIG_DLL_RST BIT(30)
@@ -617,6 +618,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
case SPEED_10:
val |= ETHQOS_MAC_CTRL_PORT_SEL;
val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
+ rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
+ FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),
+ RGMII_IO_MACRO_CONFIG);
break;
}
--
2.17.1
