[PATCH 6/9] PCI: epf-mhi: Enable MHI async read/write support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that both eDMA and iATU are prepared to support async transfer, let's
enable MHI async read/write by supplying the relevant callbacks.

In the absence of eDMA, iATU will be used for both sync and async
operations.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/endpoint/functions/pci-epf-mhi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
index 3d09a37e5f7c..d3d6a1054036 100644
--- a/drivers/pci/endpoint/functions/pci-epf-mhi.c
+++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
@@ -766,12 +766,13 @@ static int pci_epf_mhi_link_up(struct pci_epf *epf)
 	mhi_cntrl->raise_irq = pci_epf_mhi_raise_irq;
 	mhi_cntrl->alloc_map = pci_epf_mhi_alloc_map;
 	mhi_cntrl->unmap_free = pci_epf_mhi_unmap_free;
+	mhi_cntrl->read_sync = mhi_cntrl->read_async = pci_epf_mhi_iatu_read;
+	mhi_cntrl->write_sync = mhi_cntrl->write_async = pci_epf_mhi_iatu_write;
 	if (info->flags & MHI_EPF_USE_DMA) {
 		mhi_cntrl->read_sync = pci_epf_mhi_edma_read;
 		mhi_cntrl->write_sync = pci_epf_mhi_edma_write;
-	} else {
-		mhi_cntrl->read_sync = pci_epf_mhi_iatu_read;
-		mhi_cntrl->write_sync = pci_epf_mhi_iatu_write;
+		mhi_cntrl->read_async = pci_epf_mhi_edma_read_async;
+		mhi_cntrl->write_async = pci_epf_mhi_edma_write_async;
 	}
 
 	/* Register the MHI EP controller */
-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux