The bluetooth module on RB2 seems to work ootb with the WCN3988 setup. Enable it. Scanning for devices works, couldn't test pairing on a remote board. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- Changes in v2: - Set drive-strength on pin configs - Link to v1: https://lore.kernel.org/r/20231120-topic-rb2_bt-v1-0-509db2e28e70@xxxxxxxxxx --- Konrad Dybcio (2): arm64: dts: qcom: sm6115: Add UART3 arm64: dts: qcom: qrb4210-rb2: Enable bluetooth arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 87 +++++++++++++++++++++++++++++++- arch/arm64/boot/dts/qcom/sm6115.dtsi | 30 +++++++++++ 2 files changed, 116 insertions(+), 1 deletion(-) --- base-commit: 8c9660f6515396aba78d1168d2e17951d653ebf2 change-id: 20231120-topic-rb2_bt-ad4b8abc750f Best regards, -- Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
