Hello, I wanted to ask your opinion regarding one of the issues we stumbled upon on the Qualcomm RB1 and RB2 platforms. These platforms use ath10k snoc (WCN3990) WiFi "card". We noticed the following messages being spawned on the console, which I traced it to the ATH10K_FW_FEATURE_SINGLE_CHAN_INFO_PER_CHANNEL feature: ath10k_snoc c800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds) As a reminder, on this platform the wlan firmware and firmware-N.bin files come separately. The wlanmdsp.mbn is downloaded by the onboard modem DSP via the tqftpserv request (which is served from the board-specific folder qcom/qcm2210). The firmware-N.bin file is loaded by the WiFi driver itself from the generic folder, ath10k/WCN3990/hw1.0. Current firmware-5.bin file was provided with the sdm845's wlanmdsp.mbn, which is older than qcm2210/qrb4210's wlanmdsp.mbn. I'm looking for suggestions on how to make ath10k driver load firmware-N.bin file which corresponds to the board-specific wlanmdsp.mbn. In particular I'd like to hear your opinion on the following proposal: Add the optional property to the board DT, that specifies: firmware-name = "path/to/wlanmdsp.mbn". The property, if present, will be used as an override for the firmware directory. So, while the ath10k driver will not load wlanmdsp.mbn on its own, it will still look for the firmware-N files in the specified directory. -- With best wishes Dmitry
