Re: [PATCH V2 1/3] scsi: mptxsas: try 64 bit DMA when 32 bit DMA fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2015-11-10 at 14:56 -0500, Sinan Kaya wrote:
> 
> On 11/10/2015 2:43 PM, James Bottomley wrote:
> > The Issue, as stated by LSI is
> >
> >          Initially set the consistent DMA mask to 32 bit and then change
> >          it
> >          to 64 bit mask after allocating RDPQ pools by calling the
> >          function
> >          _base_change_consistent_dma_mask. This is to ensure that all the
> >          upper 32 bits of RDPQ entries's base address to be same.
> >
> 
> Need somebody from mpt to confirm that this behavior is still valid for 
> the recent cards besides altix.

OK, you don't seem to be understanding the problem: the Altix isn't a
LSI card, it was a SGI platform.  It was the platform where we first
discovered the issue that a lot of storage cards didn't work because it
by default had no memory below 4GB.  The reason coherent masks were
introduced was initially so the Altix could manufacture and manage a
region of memory in the lower 4GB region and we would guarantee to make
allocations from it so the storage cards would then work on that
platform.

I thought the Altix was a historical relic because after they
disappeared, there was no other platform with this issue ...  until you
came along.

James


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux