Re: [PATCH v3 0/3] pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 6, 2023 at 9:32 AM Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:

> The SM8650 Top Level Mode Multiplexer supports 211 GPIOs,
> and the usual UFS Reset, SDC Clk/Cmd/Data special pins.
>
> An handful of pins can have their IRQ generated by the PDC
> module, and for this support for the new wakeup_present &
> wakeup_enable_bit is required to allow the "wakeup" event
> to be passed to PDC and generate an interrupt or a wakeup
> system event.
>
> As SM8550, it also supports the i2c_pull_bit bit to enable the
> on-SoC load resistor for I2C busses.
>
> Dependencies: None
>
> For convenience, a regularly refreshed linux-next based git tree containing
> all the SM8650 related work is available at:
> https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Patches applied, unless Bjorn has some last minutes regrets,
they are in.

Had to rebase the last patch manually because of Krzysztof's
LPASS driver, check the result pls.

Yours,
Linus Walleij





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux