Re: [PATCH RESEND v3 4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode

Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> · Fri, 10 Nov 2023 14:02:10 +0530

On 11/4/2023 1:45 AM, Bjorn Andersson wrote:
On Wed, Nov 01, 2023 at 11:04:10AM +0200, Abel Vesa wrote:
From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>

The current HW_CTRL flag switches the video GDSC to HW control mode as
part of GDSC enable itself, instead of that use HW_CTRL_TRIGGER flag to
give consumer drivers more control and switch the GDSC mode as and when
required.

HW_CTRL_TRIGGER flag allows consumer drivers to switch the video GDSC to
HW/SW control modes at runtime using dev_pm_genpd_set_hwmode API.


This states what the code currently does, and what the new code will do.
But I don't find that it adequately describes _why_ this is done.


In the current implementation, the hardware is might collapse the GDSC
anytime between gdsc_enable() and gdsc_disable(). By giving "drivers
more control" the time spent in this state is reduced to some fraction
of that span, which to me implies higher power consumption.

Under the assumption that we don't want to consume more power without
reason, I'm forced to guess that there might be some scenarios that we
want this feature to keep the GDSC non-collapsed against the indication
of the hardware - to avoid some instability somewhere, perhaps?


Thanks Bjorn for your review. Sure, will update commit text with details 
in next series.

Normally, consumers will enable the GDSC and then the required clocks. 
If GDSC is moved to HW mode in gdsc_enable() itself, the subsequent 
clocks enablement that are dependent on GDSC might fail since GDSC could 
be turned off by HW. The consumers can still switch the GDSC to HW mode 
with new API right after the clocks are enabled and the control will be 
taken back to SW mode just before disabling the GDSC, so even with the 
newer implementation, HW can collapse the GDSC anytime for most of the 
duration between gdsc_enable() and gdsc_disable(). This API adds more 
flexibility for consumer drivers to control the GDSC mode as per their
requirements.

Thanks,
Jagadeesh

Regards,
Bjorn

Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
  drivers/clk/qcom/videocc-sc7180.c | 2 +-
  drivers/clk/qcom/videocc-sc7280.c | 2 +-
  drivers/clk/qcom/videocc-sdm845.c | 4 ++--
  drivers/clk/qcom/videocc-sm8250.c | 4 ++--
  drivers/clk/qcom/videocc-sm8550.c | 4 ++--
  5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/qcom/videocc-sc7180.c b/drivers/clk/qcom/videocc-sc7180.c
index 5b9b54f616b8..51439f7ba70c 100644
--- a/drivers/clk/qcom/videocc-sc7180.c
+++ b/drivers/clk/qcom/videocc-sc7180.c
@@ -166,7 +166,7 @@ static struct gdsc vcodec0_gdsc = {
  	.pd = {
  		.name = "vcodec0_gdsc",
  	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
  	.pwrsts = PWRSTS_OFF_ON,
  };
  
diff --git a/drivers/clk/qcom/videocc-sc7280.c b/drivers/clk/qcom/videocc-sc7280.c
index 615695d82319..3d07b1e95986 100644
--- a/drivers/clk/qcom/videocc-sc7280.c
+++ b/drivers/clk/qcom/videocc-sc7280.c
@@ -236,7 +236,7 @@ static struct gdsc mvs0_gdsc = {
  		.name = "mvs0_gdsc",
  	},
  	.pwrsts = PWRSTS_OFF_ON,
-	.flags = HW_CTRL | RETAIN_FF_ENABLE,
+	.flags = HW_CTRL_TRIGGER | RETAIN_FF_ENABLE,
  };
  
  static struct gdsc mvsc_gdsc = {
diff --git a/drivers/clk/qcom/videocc-sdm845.c b/drivers/clk/qcom/videocc-sdm845.c
index c77a4dd5d39c..dad011c48973 100644
--- a/drivers/clk/qcom/videocc-sdm845.c
+++ b/drivers/clk/qcom/videocc-sdm845.c
@@ -260,7 +260,7 @@ static struct gdsc vcodec0_gdsc = {
  	},
  	.cxcs = (unsigned int []){ 0x890, 0x930 },
  	.cxc_count = 2,
-	.flags = HW_CTRL | POLL_CFG_GDSCR,
+	.flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR,
  	.pwrsts = PWRSTS_OFF_ON,
  };
  
@@ -271,7 +271,7 @@ static struct gdsc vcodec1_gdsc = {
  	},
  	.cxcs = (unsigned int []){ 0x8d0, 0x950 },
  	.cxc_count = 2,
-	.flags = HW_CTRL | POLL_CFG_GDSCR,
+	.flags = HW_CTRL_TRIGGER | POLL_CFG_GDSCR,
  	.pwrsts = PWRSTS_OFF_ON,
  };
  
diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index ad46c4014a40..c1b73d852f1c 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -293,7 +293,7 @@ static struct gdsc mvs0_gdsc = {
  	.pd = {
  		.name = "mvs0_gdsc",
  	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
  	.pwrsts = PWRSTS_OFF_ON,
  };
  
@@ -302,7 +302,7 @@ static struct gdsc mvs1_gdsc = {
  	.pd = {
  		.name = "mvs1_gdsc",
  	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
  	.pwrsts = PWRSTS_OFF_ON,
  };
  
diff --git a/drivers/clk/qcom/videocc-sm8550.c b/drivers/clk/qcom/videocc-sm8550.c
index f3c9dfaee968..404c6600edae 100644
--- a/drivers/clk/qcom/videocc-sm8550.c
+++ b/drivers/clk/qcom/videocc-sm8550.c
@@ -322,7 +322,7 @@ static struct gdsc video_cc_mvs0_gdsc = {
  	},
  	.pwrsts = PWRSTS_OFF_ON,
  	.parent = &video_cc_mvs0c_gdsc.pd,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
  };
  
  static struct gdsc video_cc_mvs1c_gdsc = {
@@ -347,7 +347,7 @@ static struct gdsc video_cc_mvs1_gdsc = {
  	},
  	.pwrsts = PWRSTS_OFF_ON,
  	.parent = &video_cc_mvs1c_gdsc.pd,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
  };
  
  static struct clk_regmap *video_cc_sm8550_clocks[] = {

--
2.34.1








