On 11/8/2023 2:59 PM, Dmitry Baryshkov wrote:
On Wed, 8 Nov 2023 at 08:05, Hui Liu via B4 Relay
<devnull+quic_huliu.quicinc.com@xxxxxxxxxx> wrote:
From: Hui Liu <quic_huliu@xxxxxxxxxxx>
Add LPG LED device description.
No. You are not adding "LPG LED device description". You are adding
definition for three LEDs.
OK, I will update the commit in next patch.
Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8350c.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index f28e71487d5c..11b9f384d99c 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -34,6 +35,27 @@ pm8350c_pwm: pwm {
compatible = "qcom,pm8350c-pwm";
#pwm-cells = <2>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ label = "red";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "green";
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ label = "blue";
... and these particular LEDs are board-specific. Please fill them in
the board file instead.
Sure, I will add these node in board file.
+ };
};
};
};
---
base-commit: b9604be241587fb29c0f40450e53d0a37dc611b5
change-id: 20231108-qcom_leds-c3b0b7029008
Best regards,
--
Hui Liu <quic_huliu@xxxxxxxxxxx>
