Re: [PATCH v4 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/11/2023 13:55, Konrad Dybcio wrote:


On 11/9/23 12:30, Bryan O'Donoghue wrote:
Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
Gen 2 version 1.1 CSI-2 PHY.

The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Aside from initialization, looks like the reset seq should be more
complex:

https://git.codelinaro.org/clo/la/platform/vendor/opensource/camera-kernel/-/blob/LA.AU.1.3.7-02900-gen3_gvmgh.0/drivers/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_1_hwreg.h?ref_type=tags#L39-45

https://git.codelinaro.org/clo/la/platform/vendor/opensource/camera-kernel/-/blob/LA.AU.1.3.7-02900-gen3_gvmgh.0/drivers/cam_sensor_module/cam_csiphy/cam_csiphy_core.c#L133-154

similarly for the "common regs" that seem to extend the init seq

https://git.codelinaro.org/clo/la/platform/vendor/opensource/camera-kernel/-/blob/LA.AU.1.3.7-02900-gen3_gvmgh.0/drivers/cam_sensor_module/cam_csiphy/cam_csiphy_core.c#L491-527

Konrad

So..

https://git.codelinaro.org/clo/la/platform/vendor/opensource/camera-kernel/-/blob/LA.AU.1.3.7-02900-gen3_gvmgh.0/drivers/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_1_hwreg.h?ref_type=tags#L39

static struct csiphy_reg_t csiphy_reset_reg_1_1[] = {
	{0x0814, 0x00, 0x05, CSIPHY_LANE_ENABLE}, // this is interesting
                                                  // powers off lanemask
                                                  // seems like a good
                                                  // idea to me
	{0x0818, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, [1]
	{0x081C, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, [2]
	{0x0800, 0x01, 0x01, CSIPHY_DEFAULT_PARAMS}, // this we already
	{0x0800, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, // do right now
};

[1] [2] I don't see why you need that and I'd imagine the reset drives these values to zero anyway.. it should as I read the reg docs, I'd guess this is a reset sequence that comes out of a Si test bench.

The 0x814 warrants an investigation - i.e. can we add it across platforms without breaking existing setups.

I'll kick that to a separate - one LOC "series", so we can take our time validating if it has any unexpected side-effects across our various platforms.

---
bod




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux