DMA0 node downstream is specified at 0x900000, so fix the typo. Without
this, enabling any i2c node using DMA0 causes a hang.
Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Fixes: 41d6bca799b3 ("arm64: dts: qcom: sm8350: correct DMA controller unit address")
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Nia Espera <nespera@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 00604bf7724f..6d12066389fa 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -918,9 +918,9 @@ spi19: spi@894000 {
};
};
- gpi_dma0: dma-controller@9800000 {
+ gpi_dma0: dma-controller@900000 {
compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
- reg = <0 0x09800000 0 0x60000>;
+ reg = <0 0x00900000 0 0x60000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
--
2.42.1
