Hi,
On Sat, Nov 4, 2023 at 4:52 AM Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 11/3/23 11:54, Ankit Sharma wrote:
> > The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
> > used to build Energy Model which in turn is used by EAS to take
> > placement decisions. So add it to SC7280 soc.
> >
> > Signed-off-by: Ankit Sharma <quic_anshar@xxxxxxxxxxx>
> > ---Hi, thanks for this patch
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>
> I performed a quick grep in arch/arm64/boot/dts/qcom and noticed
> that at least one of these values is missing for:
>
> rg -l --files-without-match dynamic-power-coeff $(rg cpu@ -l) | sort
> ipq5018.dtsi (homogeneous cluster)
> ipq5332.dtsi (homogeneous cluster)
> ipq6018.dtsi (homogeneous cluster)
> ipq8074.dtsi (homogeneous cluster)
> ipq9574.dtsi (homogeneous cluster)
> msm8916.dtsi (homogeneous cluster)
> msm8939.dtsi
> msm8953.dtsi
> msm8976.dtsi
> msm8994.dtsi
> msm8996.dtsi
> msm8998.dtsi
> qcs404.dtsi (homogeneous cluster)
> qdu1000.dtsi (homogeneous cluster)
> sa8775p.dtsi
> sc7280.dtsi
> sc8180x.dtsi
> sc8280xp.dtsi
> sdm630.dtsi
> sm4450.dtsi
> sm6125.dtsi
> sm6375.dtsi
> sm8350.dtsi
> sm8450.dtsi
>
> rg -l --files-without-match capacity-dmips $(rg cpu@ -l) | sort
> ipq5018.dtsi (homogeneous cluster)
> ipq5332.dtsi (homogeneous cluster)
> ipq6018.dtsi (homogeneous cluster)
> ipq8074.dtsi (homogeneous cluster)
> ipq9574.dtsi (homogeneous cluster)
> msm8916.dtsi (homogeneous cluster)
> msm8939.dtsi
> msm8994.dtsi
> qcs404.dtsi (homogeneous cluster)
> qdu1000.dtsi (homogeneous cluster)
> sa8775p.dtsi
> sc7280.dtsi
> sm4450.dtsi
> sm6375.dtsi
> sm8350.dtsi
> sm8450.dtsi
>
> Where platforms with a single, homogeneous cluster likely don't
> benefit from EAS..
>
> Is there any chance you could dig up the correct values, for at least
> some of these platforms? Or would you know whom to ask?
>
> FWIW the one we're missing the most is sc8280xp..
FWIW, I wrote up a longwinded commit message when I added these values
for sc7180. See commit 82ea7d411d43 ("arm64: dts: qcom: sc7180: Base
dynamic CPU power coefficients in reality").
The short of it is that if you have hardware and a basic "smart
battery" to measure power consumption it's pretty easy for anyone to
add some reasonable numbers.
-Doug
