[PATCH V3 4/4] arm64: dts: qcom: qdu1000: Add ECPRI clock controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device node for ECPRI clock controller on qcom QDU1000
and QRU1000 SoCs.

Signed-off-by: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271e91..1552b5c119bb 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -381,6 +381,20 @@ gcc: clock-controller@80000 {
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux