The patch series is following from the discussion [1] and taking the suggestion, it is introducing a common dtsi, qcm6490-iot-common.dtsi, for IOT segment which would facilitate abstracting the memory map required for IOT without impacting SC7280 and avoid code duplication for the boards based on QCM6490. We would be posting the memory map changes subsequently once we converge on the approach. The series also introduces two boards for QCM6490, IDP and RB3. [1] https://lore.kernel.org/linux-arm-msm/d97ebf74-ad03-86d6-b826-b57be209b9e2@xxxxxxxxxxx/ Komal Bajaj (2): dt-bindings: arm: qcom: Add QCM6490 IDP and RB3 board arm64: dts: qcom: qcm6490: Add qcm6490 idp and rb3 board .../devicetree/bindings/arm/qcom.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 33 ++ .../boot/dts/qcom/qcm6490-iot-common.dtsi | 291 ++++++++++++++++++ arch/arm64/boot/dts/qcom/qcm6490-rb3.dts | 26 ++ 5 files changed, 354 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-iot-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-rb3.dts -- 2.42.0
