Rajendra, On Fri, Oct 09, 2015 at 03:11:02PM +0530, Rajendra Nayak wrote: > Patches 1/8 to 4/8 will need to go via the thermal tree/Eduardo. > Patches 5/8 to 8/8 will need to go via qcom-msm tree/Andy. > > Eduardo, can you please take a look at the patches and let me > know if you see any issues. > Thanks for your taking this over. I am assuming this superseeds the work by Narendran. Thanks. > Current set of patches apply on 4.3-rc4. Need to pull in clk-next > (for a dependent patch) to be able to test on ifc6410 board. > > Changes since v3: > * Dropped 'clk: qcom: create virtual child device for TSENS' which > is picked up by Stephen > * Updated GCC bindings with optional TSENS properties > > Changes since v2: > * Minor review fixes from Stephen/Punit and rebase on 4.3-rc4 > > Changes since v1: > * Created virtual tsens device from gcc driver for 8960, > with DT having a single node for gcc and tsens > * Minor fixes with rebasing on 4.3-rc1 > > Changes since RFC: > * Added support for 8916 and 8084 > * Based off the latest nvmem framework patches [1] > * Minor review fixes for comments mostly from Lina > > This is an attempt to have a single TSENS driver for > the different versions of the TSENS IP that exist, on > different qcom msm/apq SoCs' > Support is added for msm8916, msm8960 and msm8974 families. > > A lot of the work is based of original code from Stephen Boyd > and Siddartha Mohanadoss. I have also picked some of what > Narendran Rajan did in his attempt to upstream the support > for 8960 family. I could not keep the original authorship on > any of the patches because I ended up moving the code around > quite a bit in an effort to have a single driver for the > various devices. I would be glad to change the authorship > for any of the patches if needed. > > Rajendra Nayak (8): > thermal: qcom: tsens: Add a skeletal TSENS drivers > thermal: qcom: tsens-8916: Add support for 8916 family of SoCs > thermal: qcom: tsens-8974: Add support for 8974 family of SoCs > thermal: qcom: tsens-8960: Add support for 8960 family of SoCs > arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes > arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes > arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes > arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes > > .../devicetree/bindings/clock/qcom,gcc.txt | 20 ++ > .../devicetree/bindings/thermal/qcom-tsens.txt | 33 +++ > arch/arm/boot/dts/qcom-apq8064.dtsi | 101 +++++++ > arch/arm/boot/dts/qcom-apq8084.dtsi | 105 ++++++++ > arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++ > arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++ > drivers/thermal/Kconfig | 5 + > drivers/thermal/Makefile | 1 + > drivers/thermal/qcom/Kconfig | 10 + > drivers/thermal/qcom/Makefile | 2 + > drivers/thermal/qcom/tsens-8916.c | 107 ++++++++ > drivers/thermal/qcom/tsens-8960.c | 291 +++++++++++++++++++++ > drivers/thermal/qcom/tsens-8974.c | 239 +++++++++++++++++ > drivers/thermal/qcom/tsens-common.c | 130 +++++++++ > drivers/thermal/qcom/tsens.c | 206 +++++++++++++++ > drivers/thermal/qcom/tsens.h | 69 +++++ > 16 files changed, 1490 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt > create mode 100644 drivers/thermal/qcom/Kconfig > create mode 100644 drivers/thermal/qcom/Makefile > create mode 100644 drivers/thermal/qcom/tsens-8916.c > create mode 100644 drivers/thermal/qcom/tsens-8960.c > create mode 100644 drivers/thermal/qcom/tsens-8974.c > create mode 100644 drivers/thermal/qcom/tsens-common.c > create mode 100644 drivers/thermal/qcom/tsens.c > create mode 100644 drivers/thermal/qcom/tsens.h > > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
