Re: [PATCH v3] firmware: qcom_scm: Clear download bit during reboot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 26 Oct 2023 at 17:16, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
>
> Hey Robert,
>
> Just remembered this thread again,
>
> is this issue got fixed with
>
> https://lore.kernel.org/lkml/20230816164641.3371878-1-robimarko@xxxxxxxxx/

Sadly no, as this issue is affecting all IPQ4019 boards and not just
the ones that have SDI enabled.

Regards,
Robert
>
>
> -Mukesh
>
> On 5/26/2023 3:13 AM, Robert Marko wrote:
> > On Tue, 23 May 2023 at 11:42, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 5/22/2023 3:34 PM, Robert Marko wrote:
> >>> On Mon, 22 May 2023 at 11:26, Robert Marko <robimarko@xxxxxxxxx> wrote:
> >>>>
> >>>> On Mon, 22 May 2023 at 11:11, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>> On 5/22/2023 2:29 PM, Robert Marko wrote:
> >>>>>> On Mon, 22 May 2023 at 08:11, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> On 5/18/2023 3:45 PM, Robert Marko wrote:
> >>>>>>>>
> >>>>>>>> On 16. 03. 2023. 16:14, Mukesh Ojha wrote:
> >>>>>>>>> During normal restart of a system download bit should
> >>>>>>>>> be cleared irrespective of whether download mode is
> >>>>>>>>> set or not.
> >>>>>>>>>
> >>>>>>>>> Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control")
> >>>>>>>>> Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
> >>>>>>>>
> >>>>>>>> Hi, this has been backported to 5.15.111, however it seems to be
> >>>>>>>> breaking reboot
> >>>>>>>> on IPQ4019 by causing the board to then hang in SBL with:
> >>>>>>>> root@OpenWrt:/# reboot
> >>>>>>>> root@OpenWrt:/# [   76.473541] device lan1 left promiscuous mode
> >>>>>>>> [   76.474204] br-lan: port 1(lan1) entered disabled state
> >>>>>>>> [   76.527975] device lan2 left promiscuous mode
> >>>>>>>> [   76.530301] br-lan: port 2(lan2) entered disabled state
> >>>>>>>> [   76.579376] device lan3 left promiscuous mode
> >>>>>>>> [   76.581698] br-lan: port 3(lan3) entered disabled state
> >>>>>>>> [   76.638434] device lan4 left promiscuous mode
> >>>>>>>> [   76.638777] br-lan: port 4(lan4) entered disabled state
> >>>>>>>> [   76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down
> >>>>>>>> [   76.978883] device eth0 left promiscuous mode
> >>>>>>>> [   76.987077] ipqess-edma c080000.ethernet eth0: Link is Down
> >>>>>>>> [
> >>>>>>>> Format: Log Type - Time(microsec) - Message - Optional Info
> >>>>>>>> Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
> >>>>>>>> S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
> >>>>>>>> S - IMAGE_VARIANT_STRING=DAABANAZA
> >>>>>>>> S - OEM_IMAGE_VERSION_STRING=CRM
> >>>>>>>> S - Boot Config, 0x00000021
> >>>>>>>> S - Reset status Config, 0x00000010
> >>>>>>>> S - Core 0 Frequency, 0 MHz
> >>>>>>>> B -       261 - PBL, Start
> >>>>>>>> B -      1339 - bootable_media_detect_entry, Start
> >>>>>>>> B -      1679 - bootable_media_detect_success, Start
> >>>>>>>> B -      1693 - elf_loader_entry, Start
> >>>>>>>> B -      5076 - auth_hash_seg_entry, Start
> >>>>>>>> B -      7223 - auth_hash_seg_exit, Start
> >>>>>>>> B -    578349 - elf_segs_hash_verify_entry, Start
> >>>>>>>> B -    696356 - PBL, End
> >>>>>>>> B -    696380 - SBL1, Start
> >>>>>>>> B -    787236 - pm_device_init, Start
> >>>>>>>> D -         7 - pm_device_init, Delta
> >>>>>>>> B -    788701 - boot_flash_init, Start
> >>>>>>>> D -     52782 - boot_flash_init, Delta
> >>>>>>>> B -    845625 - boot_config_data_table_init, Start
> >>>>>>>> D -      3836 - boot_config_data_table_init, Delta - (419 Bytes)
> >>>>>>>> B -    852841 - clock_init, Start
> >>>>>>>> D -      7566 - clock_init, Delta
> >>>>>>>> B -    864883 - CDT version:2,Platform ID:9,Major ID:0,Minor
> >>>>>>>> ID:0,Subtype:64
> >>>>>>>> B -    868413 - sbl1_ddr_set_params, Start
> >>>>>>>> B -    873402 - cpr_init, Start
> >>>>>>>> D -         2 - cpr_init, Delta
> >>>>>>>> B -    877842 - Pre_DDR_clock_init, Start
> >>>>>>>> D -         4 - Pre_DDR_clock_init, Delta
> >>>>>>>> D -     13234 - sbl1_ddr_set_params, Delta
> >>>>>>>> B -    891155 - pm_driver_init, Start
> >>>>>>>> D -         2 - pm_driver_init, Delta
> >>>>>>>> B -    909105 - Image Load, Start
> >>>>>>>> B -   1030210 - Boot error ocuured!. Error code: 303d
> >>>>>>>>
> >>>>>>>> Reverting the commit fixes rebooting.
> >>>>>>>
> >>>>>>> Hi Robert,
> >>>>>>>
> >>>>>>> Can you check if disable SDI [1] works with this issue
> >>>>>>>
> >>>>>>> https://lore.kernel.org/linux-arm-msm/20230518140224.2248782-1-robimarko@xxxxxxxxx/
> >>>>>>>
> >>>>>>> [1]
> >>>>>>>
> >>>>>>>
> >>>>>>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> >>>>>>> index fde33acd46b7..01496ceb7136 100644
> >>>>>>> --- a/drivers/firmware/qcom_scm.c
> >>>>>>> +++ b/drivers/firmware/qcom_scm.c
> >>>>>>> @@ -1508,6 +1508,7 @@ static int qcom_scm_probe(struct platform_device
> >>>>>>> *pdev)
> >>>>>>>      static void qcom_scm_shutdown(struct platform_device *pdev)
> >>>>>>>      {
> >>>>>>>             /* Clean shutdown, disable download mode to allow normal restart */
> >>>>>>> +       qcom_scm_disable_sdi();
> >>>>>>>             qcom_scm_set_download_mode(false);
> >>>>>>>      }
> >>>>>>
> >>>>>> Hi,
> >>>>>> I can confirm reboot works this way as well.
> >>>>>
> >>>>> That's great, So, i don't need to revert the patch and you can
> >>>>> add this in your patch without target specific check ?
> >>>>
> >>>> Oh, you mean IPQ4019 not rebooting?
> >>>> I haven't tested that, give me couple of minutes to try that out.
> >>>> Cause, the link was just back to the SDI patchset.
> >>>
> >>> And, I can confirm that IPQ4019 does not reboot even with SDI disabled if dload
> >>> mode was set so it still needs a revert.
> >>
> >> Ok, So, before we go for revert of the change.
> >>
> >> - How do you generally collect the ram dump on your device on crash ?
> >>     did you check if you get any error when qcom_scm_set_download_mode()
> >>     get called.
> >
> > Hi,
> > Unfortunately, I dont have a way to collect the RAM dump in this case.
> >
> > I checked and __qcom_scm_set_dload_mode returns 0 and there are no
> > errors.
> >
> > Regards,
> > Robert
> >>
> >>
> >> -- Mukesh
> >>
> >>>
> >>> Regards,
> >>> Robert
> >>>>
> >>>> Regards,
> >>>> Robert
> >>>>>
> >>>>> -- Mukesh
> >>>>>
> >>>>>>
> >>>>>> Regards,
> >>>>>> Robert
> >>>>>>>
> >>>>>>>
> >>>>>>> -- Mukesh
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Regards,
> >>>>>>>> Robert
> >>>>>>>>
> >>>>>>>>> ---
> >>>>>>>>> Changes in v3:
> >>>>>>>>>       - Added Fixes tag.
> >>>>>>>>>       - Removed it from below patch series, as it makes sense to go this
> >>>>>>>>> independently.
> >>>>>>>>>
> >>>>>>>>> https://lore.kernel.org/lkml/1677664555-30191-1-git-send-email-quic_mojha@xxxxxxxxxxx/
> >>>>>>>>>
> >>>>>>>>> Changes in v2:
> >>>>>>>>>       - No change.
> >>>>>>>>>
> >>>>>>>>>      drivers/firmware/qcom_scm.c | 3 +--
> >>>>>>>>>      1 file changed, 1 insertion(+), 2 deletions(-)
> >>>>>>>>>
> >>>>>>>>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> >>>>>>>>> index 468d4d5..3e020d1 100644
> >>>>>>>>> --- a/drivers/firmware/qcom_scm.c
> >>>>>>>>> +++ b/drivers/firmware/qcom_scm.c
> >>>>>>>>> @@ -1506,8 +1506,7 @@ static int qcom_scm_probe(struct platform_device
> >>>>>>>>> *pdev)
> >>>>>>>>>      static void qcom_scm_shutdown(struct platform_device *pdev)
> >>>>>>>>>      {
> >>>>>>>>>          /* Clean shutdown, disable download mode to allow normal restart */
> >>>>>>>>> -    if (download_mode)
> >>>>>>>>> -        qcom_scm_set_download_mode(false);
> >>>>>>>>> +    qcom_scm_set_download_mode(false);
> >>>>>>>>>      }
> >>>>>>>>>      static const struct of_device_id qcom_scm_dt_match[] = {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux