Re: [PATCH 3/3] arm64: dts: qcom: ipq6018: add SDHCI node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 24. 04. 2023. 14:13, Mantas Pucka wrote:
IPQ6018 has one SD/eMMC controller, add node for it.

Signed-off-by: Mantas Pucka <mantas@xxxxxxxxxxxx>

Tested-by: Robert Marko <robimarko@xxxxxxxxx>

---
  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 23 +++++++++++++++++++++++
  1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9ff4e9d45065..b129b23d68b1 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -414,6 +414,29 @@
  			};
  		};
+ sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x07804000 0x0 0x1000>,
+			      <0x0 0x07805000 0x0 0x1000>,
+			      <0x0 0x07808000 0x0 0x2000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+			supports-cqe;
+			bus-width = <8>;
+			status = "disabled";
+		};
+
  		blsp_dma: dma-controller@7884000 {
  			compatible = "qcom,bam-v1.7.0";
  			reg = <0x0 0x07884000 0x0 0x2b000>;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux