Re: [PATCH 9/9] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 31.10.2023 11:31, Luca Weiss wrote:
> On Mon Oct 30, 2023 at 8:26 PM CET, Konrad Dybcio wrote:
>> On 27.10.2023 16:20, Luca Weiss wrote:
>>> Now that the WPSS remoteproc is enabled, enable wifi so we can use it.
>>>
>>> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
>>> ---
>>>  arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 4 ++++
>>>  1 file changed, 4 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
>>> index d65eef30091b..e7e20f73cbe6 100644
>>> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
>>> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
>>> @@ -713,3 +713,7 @@ &venus {
>>>  	firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
>>>  	status = "okay";
>>>  };
>>> +
>>> +&wifi {
>>> +	status = "okay";
>> qcom,ath11k-calibration-variant?
> 
> What value would I put there for my device? Based on existing usages
> (mostly for ath10k) I'd say "Fairphone_5"?
> 
> And you mean I should add this property in dts before even looking into
> the firmware/calibration side of it?
This is basically a "compatible" for the board file, I think Fairphone_5
makes sense here, perhaps Dmitry can confirm

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux