[PATCH v6 1/2] cpufreq: qti: Enable cpufreq for ipq53xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.

Added support for ipq53xx on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.

nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
v6:	Rebase to top of tree
v5:	Merge IPQ53xx with existing APQ8096 case
v2:	Move IPQ53xx after APQ8096SG
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 0718191..53da255 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -180,6 +180,7 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "ti,am62a7", },
 	{ .compatible = "ti,am62p5", },
 
+	{ .compatible = "qcom,ipq5332", },
 	{ .compatible = "qcom,ipq6018", },
 	{ .compatible = "qcom,ipq8064", },
 	{ .compatible = "qcom,ipq8074", },
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 158c0e1..4f7af70 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -183,6 +183,11 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 	switch (msm_id) {
 	case QCOM_ID_MSM8996:
 	case QCOM_ID_APQ8096:
+	case QCOM_ID_IPQ5332:
+	case QCOM_ID_IPQ5322:
+	case QCOM_ID_IPQ5312:
+	case QCOM_ID_IPQ5302:
+	case QCOM_ID_IPQ5300:
 		drv->versions = 1 << (unsigned int)(*speedbin);
 		break;
 	case QCOM_ID_MSM8996SG:
@@ -541,6 +546,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
 	{ .compatible = "qcom,msm8909", .data = &match_data_msm8909 },
 	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
 	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+	{ .compatible = "qcom,ipq5332", .data = &match_data_kryo },
 	{ .compatible = "qcom,ipq6018", .data = &match_data_ipq6018 },
 	{ .compatible = "qcom,ipq8064", .data = &match_data_ipq8064 },
 	{ .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 },
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux