The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d: Linux 6.6-rc1 (2023-09-10 16:28:41 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-clk-for-6.7 for you to fetch changes up to e0e6373d653b7707bf042ecf1538884597c5d0da: clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider (2023-10-21 12:59:13 -0700) ---------------------------------------------------------------- Qualcomm clock updates for v6.7 Initial support for the SM4450 platform is introduced, with the Global Clock Controller and RPMh clock controller additions. CLK_SET_RATE_PARENT is dropped for clocks with fixed-rate GPLLs, across a variety of IPQ platforms. On IPQ6018, GPLL0 is a missing parent of APCS PLL, so this is corrected. For IPQ6018 the I2C clock for QUP6 was previously omitted, as disabling it is reported to cause problems for RPM. It's now added, but marked as critical. Stromer Plus is introduced, and safe source switching of the a53pll in IPQ5332 is introduced. SM8550 Video and GPU clock controllers are switched to use the OLE PLL configure method, instead of manually specifying additional components of the l-value. A couple of fixes related to halt bit checks and SMMU GDSC are introduced for MSM8998. A possible integer overflow in the frequency calculation in the RCG code is addressed. Clocked managed through RPM are removed from the MSM8996 Global Clock Controller. Support for the Camera Clock Controller on SM8550 is added. PLL configuration for the three HFPLLs in MSM8976 are added. The MSM8996 CBF clock driver's remove function is transitioned to the void-returning variant. ---------------------------------------------------------------- Adam Skladowski (4): clk: qcom: clk-hfpll: Configure l_val in init when required clk: qcom: hfpll: Allow matching pdata dt-bindings: clock: qcom,hfpll: Document MSM8976 compatibles clk: qcom: hfpll: Add MSM8976 PLL data Ajit Pandey (4): dt-bindings: clock: qcom: Add RPMHCC for SM4450 clk: qcom: rpmh: Add RPMH clocks support for SM4450 dt-bindings: clock: qcom: Add GCC clocks for SM4450 clk: qcom: Add GCC driver support for SM4450 Bjorn Andersson (2): Merge branch '20230707035744.22245-2-quic_jkona@xxxxxxxxxxx' into clk-for-6.7 Merge branch '20230909123431.1725728-1-quic_ajipan@xxxxxxxxxxx' into clk-for-6.7 Danila Tikhonov (1): clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src Devi Priya (1): clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies Dmitry Baryshkov (2): clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure Jagadeesh Kona (4): dt-bindings: clock: qcom: Add SM8550 camera clock controller clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550 clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks Kathiravan Thirumoorthy (6): clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider Konrad Dybcio (4): clk: qcom: gcc-msm8996: Remove RPM bus clocks clk: qcom: mmcc-msm8998: Don't check halt bit on some branch clks clk: qcom: mmcc-msm8998: Fix the SMMU GDSC clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect Luca Weiss (1): clk: qcom: mmcc-msm8974: remove ocmemcx_ahb_clk Rob Herring (1): clk: qcom: Replace of_device.h with explicit includes Robert Marko (1): clk: qcom: gcc-ipq6018: add QUP6 I2C clock Uwe Kleine-König (1): clk: qcom: cbf-msm8996: Convert to platform remove callback returning void Varadarajan Narayanan (6): clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM clk: qcom: clk-alpha-pll: introduce stromer plus ops clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll .../devicetree/bindings/clock/qcom,hfpll.txt | 3 + .../devicetree/bindings/clock/qcom,rpmhcc.yaml | 1 + .../devicetree/bindings/clock/qcom,sm4450-gcc.yaml | 55 + .../bindings/clock/qcom,sm8450-camcc.yaml | 8 +- drivers/clk/qcom/Kconfig | 17 + drivers/clk/qcom/Makefile | 2 + drivers/clk/qcom/apss-ipq-pll.c | 4 +- drivers/clk/qcom/apss-ipq6018.c | 61 +- drivers/clk/qcom/camcc-sm8550.c | 3565 ++++++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.c | 92 + drivers/clk/qcom/clk-alpha-pll.h | 3 + drivers/clk/qcom/clk-cbf-8996.c | 12 +- drivers/clk/qcom/clk-hfpll.c | 4 + drivers/clk/qcom/clk-hfpll.h | 1 + drivers/clk/qcom/clk-rcg2.c | 14 +- drivers/clk/qcom/clk-rpmh.c | 21 + drivers/clk/qcom/clk-smd-rpm.c | 16 +- drivers/clk/qcom/gcc-ipq5018.c | 6 +- drivers/clk/qcom/gcc-ipq5332.c | 4 - drivers/clk/qcom/gcc-ipq6018.c | 27 +- drivers/clk/qcom/gcc-ipq8074.c | 6 - drivers/clk/qcom/gcc-ipq9574.c | 4 - drivers/clk/qcom/gcc-msm8996.c | 237 +- drivers/clk/qcom/gcc-sm4450.c | 2898 ++++++++++++++++ drivers/clk/qcom/gcc-sm8150.c | 2 +- drivers/clk/qcom/gpucc-sm8550.c | 10 +- drivers/clk/qcom/hfpll.c | 59 +- drivers/clk/qcom/mmcc-msm8974.c | 18 - drivers/clk/qcom/mmcc-msm8998.c | 7 +- drivers/clk/qcom/videocc-sm8550.c | 10 +- include/dt-bindings/clock/qcom,mmcc-msm8974.h | 1 - include/dt-bindings/clock/qcom,sm4450-gcc.h | 197 ++ include/dt-bindings/clock/qcom,sm8550-camcc.h | 187 + 33 files changed, 7235 insertions(+), 317 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml create mode 100644 drivers/clk/qcom/camcc-sm8550.c create mode 100644 drivers/clk/qcom/gcc-sm4450.c create mode 100644 include/dt-bindings/clock/qcom,sm4450-gcc.h create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h
