Add property "qcom,cmb_msr_num" to support CMB MSR(mux select register)
for TPDM. It specifies the number of CMB MSR registers supported by
the TDPM.
Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
Signed-off-by: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index f9a2025..a586b80a 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -69,6 +69,15 @@ properties:
minimum: 0
maximum: 32
+ qcom,cmb-msrs-num:
+ description:
+ Specifies the number of CMB MSR(mux select register) registers supported
+ by the monitor. If this property is not configured or set to 0, it means
+ this TPDM doesn't support CMB MSR.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 32
+
clocks:
maxItems: 1
@@ -124,6 +133,7 @@ examples:
reg-names = "tpdm-base";
qcom,cmb-element-size = /bits/ 8 <64>;
+ qcom,cmb-msrs-num = <32>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
--
2.7.4
