[PATCH 2/2] arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This dts adds support for Huawei Honor 5X / GR5 (2016) smartphone
released in 2015.

Add device tree with initial support for:

- GPIO keys
- Hall sensor
- SDHCI (internal and external storage)
- WCNSS (BT/WIFI)
- Sensors (accelerometer and proximity)
- Vibrator
- Touchscreen

Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
Signed-off-by: Lukas Walter <lukas.walter@xxxxxxxxx>
---
Changes in v2:
- Switch Signed-off-by order
- Specify reserved-memory region usage
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8939-huawei-kiwi.dts     | 242 ++++++++++++++++++
 2 files changed, 243 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..1b3057c1a68d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 000000000000..3cec51891aed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
-- 
2.42.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux