IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.
Add support to read the eFuse and populate the OPPs based on it.
------------------------------------------------
Frequency BIT2 BIT1 opp-supported-hw
1.1GHz 1.5GHz
------------------------------------------------
1100000000 1 1 0x7
1500000000 0 1 0x3
------------------------------------------------
Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
v4: Change opp-supported-hw from 0xf to 0x7 in commit log
and DT entry.
v2: Fix inconsistencies in comment and move it to commit log
as suggested
Remove opp-microvolt entries as no regulator is managed by Linux
cpu_speed_bin -> cpu-speed-bin in node name
Remove "nvmem-cell-names" due to dtbs_check error
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 4206f05..42e2e48 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -91,11 +91,19 @@
};
cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
opp-shared;
+ nvmem-cells = <&cpu_speed_bin>;
- opp-1488000000 {
- opp-hz = /bits/ 64 <1488000000>;
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
};
@@ -163,6 +171,11 @@
reg = <0x000a4000 0x721>;
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@1d {
+ reg = <0x1d 0x2>;
+ bits = <7 2>;
+ };
};
rng: rng@e3000 {
--
2.7.4
